Spring Cleaning Tips For Your Fiberglass Pool and Spa

Finally, it's springtime, and we're starting to see the temperatures climb! Do you know what that means? Time to get your fiberglass pool ready for use! In-ground pools in Biloxi, MS are often winterized or just not used as often during the wintertime, so they may need a little extra loving before you dive in headfirst.

Here are some essential spring-cleaning maintenance tips for in-ground pools in Biloxi, MS!

Drain your Pool (not all the way!)

An essential part of maintaining a fiberglass pool is to never drain it all the way! If you do, the change in pressure could lead to damage to the pool's outer shell. Instead, lower the water level to around six to eight inches to allow for easier cleaning. This lets you get to most areas of the pool without risking cracking the fiberglass.

Clean Out your Pool

Once your pool is drained, use a non-abrasive cleaner and soft sponge to clean the pool walls of any debris or scum. The gel coat is pretty fragile, so it's very important to choose gentle products. During this step, you can also skim the water for any sticks, leaves, or bugs that may be floating in the pool, and vacuum dirt or sand off the pool floor. Finish off with a layer of auto wax to protect the fiberglass pool walls from its soon-to-be frequent use.

Check the Filters

In-ground pools in Biloxi, MS can gather a lot of debris during the fall and wintertime. So, it's important to check the filters before enjoying your background oasis. This should also be a part of your weekly pool maintenance during the summer.

Balance the Chemicals

Though fiberglass pools are lower maintenance than other types of in-ground pools in Biloxi, MS, it's still crucial to maintain the proper chemical balance in the water. Follow your manufacturer's instructions on what your chemical levels should be and check them each week in addition to the filters.